Adapters, Cords, & Accessories
H Prong
to Mono

 "H"-PRONG TO MONOPLUG ADAPTER
One piece adapter combining a female "H"-prong socket with a male monoplug. Makes "H"-prong style slaves, receivers and cords compatible with European style monoplug jacks found in Balcar, White Lightning, Photogenic, Bowens, and other flash units.

$24.95
PCH PC (FEMALE) TO "H"-PRONG ADAPTER
A convenient converter that has a molded PC (female) plug and a molded standard "H"-prong female socket connected by a 9" cord.

$15.95
PCM

SB24/SB25/SB26 ADAPTER
A molded, one-piece "male PC" to "male PC" adapter that allows any Wien receiver or slave having a PC terminal to be cordlessly connected to the Nikon SB24, SB25, SB26 sync terminal.

$9.95
HSH HOT SHOE TO H RECEPTACLE
H Prong to H Prong receptacle for plugging in H Prong slaves like the SSL or SSLD. It has a quarter twenty threaded insert for light stand.

$36.00
Mini Plug
to PC
MINI-PLUG-TO-PC CORD REPLACEMENT
As supplied with Pro-Sync and SSR Systems

$12.95
TeleFlash
Monitor
TeleFlash Monitor
Provides absolute positive confirmation that a flash unit fired at shutter release. The TeleFlash Monitor is a compact, battery operated flash monitor that blinks for about five seconds when the flash fires, then automatically resets. There are no electrical connections. TeleFlash senses the pulse current entering the flash tube by means of electro-magnetic induction. TeleFlash is attached to the flash head cord. It can also be affixed directly to the flash head with Velcro (provided).

NOTE: Common sense might suggest that the flash unit's recycle light also confirms flash operation but it often does not. It merely indicates discharge of the capacitors but not operations of the flash tube itself. Only TeleFlash tells you that! Any failure is instantly detected. It also reminds you when a remote light is off. Works with on-camera flash as well.
Fastens to power cord by means of supplied quick-release nylon clip, or with Velcro tape (supplied). Requires 9V alkaline battery that lasts about a year (not supplied). 1-3/8 x 3 x 1". 1.4 oz. (less battery).

$48.00

Batteryless Digital Camera Slaves

PND-3 DIGITAL "PEANUT" SLAVE/3PAK
Same as PN3 but for digital cameras Plugs directly into Vivitar 283/285; compatible with other flash units via standard PC cord. Plugs directly into Nikon SB-24/25/26 by means of PCM Adapter

 

$57.00
PND-1 DIGITAL "PEANUT" SLAVE/1 PAK
Same as PN3 but for digital cameras Plugs directly into Vivitar 283/285; compatible with other flash units via standard PC cord. Plugs directly into Nikon SB-24/25/26 by means of PCM Adapter

 

$19.00

Wein Safe Sync Protectors

HSHSB HOT SHOE to Hot Shoe Safe Sync
 Standard PC - hot Shoe

No Image Available

$58.00
SSH SAFE-SYNC WITH "H" Prong (H in and H out)
Protects camera against high sync voltage which can cause arcing and pitting at the shutter contacts, as well as long term circuit damage. Camera manufacturers now warn against using flash units that exceed the ISO recommended maximum sync voltage of 24V. Safe-Sync reduces sync voltage to 6 volts, totally isolating the camera from harmful current levels. Does not interfere with sync circuits below 6V. Features both "H"-prong and PC connections. Safe Syncs safely reduce any electronic flash source from up to 400 volts to less than 6 volts to the camera sync input. This is absolutely mandatory for all high end and especially all Digital Cameras.

$58.00

HS Hot Shoe Slaves

HS HOT SHOE SLAVE
 (INDOOR RANGE-150')With Hot Shoe and PC terminals.

$38.00
FFA REPLACEMENT FOOT/SLAVE FOR VIVITAR
150'-range hot shoe slave with a plus: can be used to permanently repair broken flash foot on any Vivitar 283 or 285 flash unit. Features household-style sync terminal (automatically overrides slave), 1/4"-20 threaded socket, for tripod/lightstand mounting and hardware necessary to make Vivitar repairs. No hard-wiring necessary, installation requires only a #0 screwdriver. These batteryless, pulse light slaves are the handiest available. Simply slide them onto flash hot shoes, and that's it. Or, attach PC cord (not supplied) from flash to slave's PC terminal. "Surround Sync" design ensures omnidirectional performance. Slaves are cast in plastic for incredible durability and integrated with a precision, extruded aluminum housing for "bulletproof" design. Includes 1/4"-20 tripod socket.

$58.00

L8 Series Micro Slave

L8 MICRO SLAVE
(INDOOR RANGE-150')
With "H"-prong for all flash units accepting household-style plugs. Rugged and dependable. The original, batteryless, pulse-light micro-slaves, Incredibly rugged yet super responsive to pulse light. "Surround Sync" design ensures omnidirectional performance.
Slaves are cast in plastic for strength, durability and electro-optical amplification. No Batteries Required.
$29.00
XL8 MICRO ULTRA SLAVE
(LONG RANGE-400')
With "H"-prong plus PC tip. Non-polarized. Unaffected by sunlight. For all flash units accepting household-style plugs or PC cords. The original, batteryless, pulse-light micro-slaves, Incredibly rugged yet super responsive to pulse light. "Surround Sync" design ensures omnidirectional performance.
Slaves are cast in plastic for strength, durability and electro-optical amplification. No Batteries Required.
Image Not Available $48.00
XL8-E MICRO ULTRA SLAVE
(LONG RANGE-400')
with Monoplug and PC terminals. For Bowens, Balcar, White Lightning, Photogenic and other units equipped with plug jacks or PC terminal. The original, batteryless, pulse-light micro-slaves, Incredibly rugged yet super responsive to pulse light. "Surround Sync" design ensures omnidirectional performance.
Slaves are cast in plastic for strength, durability and electro-optical amplification. No Batteries Required.

$45.95
We carry the full line of Cullman Tripods.
If you don't see what you are looking for, give us a call.

Koh's Camera
2662 Jerusalem Avenue, North Bellmore, NY 11710

516/826-956
6/67       Fax: 516/826-6257

Store Hours
10:00 am to 5:00 pm
Saturday 10:00 am to 3:00 pm
Closed Monday, Thursday and Sunday

If you have any questions, please click here to e-mail us.